Shanbo Assembly Line
為客戶量身定做各種專用繞線和智能化設備，提供包括線圈骨架的改良、插針、繞線、包膠、焊接、測試、沖壓和成品組裝等自動化生産線方案。以服務客戶滿足客戶需求為目标，不斷提供國內少有的高性價比繞線和專業自動化智能設備。
所屬分類：
關鍵詞：
全自動繞線機
立即留言
産品詳情
Equipment operation process
Station 1: Install the carbon brush holder assembly
The specific workflow is as follows: (Manual workstation)
(1) Manually fit the carbon brush holder onto the rotor and place it facing upwards on the fixture on the right side of the fixture board; Each fixture board has two fixture fixtures (one of which is placed in the machine casing).
(2) Press the release button to block the cylinder from releasing the accompanying fixture.
Station 2: Pressure bearing (automatic) (electric cylinder)
The specific workflow is as follows:
(1) The tooling plate flows to the pressure bearing station and is manually operated to grab the bearing;
(2) Press the release button, lift the cylinder downwards, block the cylinder from releasing, and follow the fixture to the next workstation.
Station 3: Manually place the eccentric bearing and press the retaining ring (manual station)
The specific workflow is as follows:
(1) When the accompanying fixture is in place and the device detects a workpiece on the accompanying fixture, it starts automatic cycle work;
(2) The lifting mechanism is lifted upwards and accurately positioned to fix the accompanying fixture, and the eccentric axis is positioned;
(3) Manually grab the eccentric bearing and retaining ring and place them on the rotor eccentric shaft to start the press;
(4) After each mechanism returns to its original position, the lifting mechanism descends, blocking the release of the cylinder, and the accompanying fixture flows to the next workstation;
Station 4: Bearing pressed into the casing (electric cylinder)
The specific workflow is as follows:
(1) Manually grab the bearing and put it into the casing, and start the press;
(2) Press the release button, lift the cylinder downwards, block the cylinder from releasing, and follow the fixture to the next workstation.
Station 5: Automatic dispensing
The specific workflow is as follows
(1) When the accompanying fixture is in place and the device detects a workpiece on the accompanying fixture, it starts automatic dispensing work;
Station 6: Install six magnetic tiles (manual station, equipped with 2 stations and 2 sets of tooling)
The specific workflow is as follows:
(1) When the accompanying fixture is in place and the device detects a workpiece on the accompanying fixture, it starts automatic cycle work;
(2) The lifting mechanism is lifted upwards and accurately positioned to fix the accompanying fixture;
(3) After manually installing six magnetic tiles, the accompanying fixture is in place and the lifting mechanism is lifted upwards to fix the accompanying fixture;
(4) After completion, the mechanism returns to its original position according to the program;
(5) After each mechanism returns to its original position, the lifting mechanism descends, blocking the release of the cylinder.
Station 7: Riveting machine casing
The specific workflow is as follows:
(1) When the accompanying fixture is in place and the device detects a workpiece on the accompanying fixture, it starts automatic cycle work;
(2) The lifting mechanism is lifted upwards and accurately positioned to fix the accompanying fixture;
(3) Manually install the rotor into the casing, start the press, and the machine automatically presses the rivet.
ONLINE MESSAGE
在線留言
*注：請務必信息填寫準确，并保持通訊暢通，我們會盡快與你取得(de)聯系